Toro 1200 ユーザーズマニュアル

Line Painter 1200

Figure 8

2

3

4

1

5

6

7

8

9

6

1. Park machine on a level surface, stop engine, en-

gage parking brake and remove key from the ignition

switch. Remove high tension lead from the spark plug

and position the lead away from the spark plug.

2. Disconnect castor release cable from castor release

lever on machine handle:

A.  Loosen jam nut that secures cable to handle as-

sembly.

B.  Remove hair pin that retains cable end to castor

release lever.

C.  Slide cable end from castor release lever.

3. Disconnect castor release cable from castor release

detent under front of machine (Figs. 9 and 10):

A. Loosen jam nuts that secure cable to chassis

bracket.

B. Remove hair pin and clevis pin that secure cable

clevis to castor release lever.

C.  Slide cable clevis from release lever.

4. Note routing of castor release cable. Remove cable

from machine.

1. Position castor release cable to machine.

2. Connect castor release cable to castor release lever

on machine handle:

A. Slide cable end onto castor release lever and se-

cure with hair pin.

B.  Secure cable to handle assembly with jam nut.

C. Make sure that cable boot is positioned over end

of cable.