Toro 1200 ユーザーズマニュアル

Line Painter 1200

Figure 13

2

3

4

1

5

6

7

8

9

3

1. Park machine on a level surface, stop engine, en-

gage parking brake and remove key from the ignition

switch. Remove high tension lead from the spark plug

and position the lead away from the spark plug.

2. Disconnect paint control cable from paint control

lever on machine handle:

A.  Loosen jam nut that secures cable to handle as-

sembly.

B.  Remove hair pin that retains cable end to paint

control lever.

C.  Slide cable end from paint control lever.

3. Disconnect paint control cable from paint shutoff

valve (Fig. 14):

A. Loosen jam nuts that secure cable to chassis

bracket.

B. Remove two (2) pins that secure paint shutoff

valve lever to shutoff valve. Shift position of lever to

allow cable clevis removal.

C. Remove hair pin and clevis pin that secure cable

clevis to paint shutoff valve lever.

4. Note routing of paint control cable. Remove cable

from machine.