Uniden UBC3300XLT ユーザーズマニュアル

9

• Trunk Tracking – Follow VHF High Band UHF

800/900MHz trunked public safety and public service
systems just as if conventional two-way communications
were used. 

• Multi-Track – Track more than one trunking system 

at a time. Scan conventional and trunked systems at the
same time. 

• 1000 Channels – Program one frequency into each

channel. You must have at least one channel programmed
to use the Scan mode.

• 22 Bands – Includes 22 bands, with aircraft and 800 MHz.

• 10 Banks – 10 banks with 100 channels each are useful for

storing similar frequencies to maintain faster scanning
cycles or for storing all the frequencies of a trunked system.

• 25 MHz-1300 MHz – Indicates the range of frequencies that

can be searched within the bands of your scanner.

Note: The frequency coverage is not continuous.

• 10 Priority Channels – You can assign one priority

channel in each bank. Assigning a priority channel allows
you to keep track of activity on your most important
channel(s) while monitoring other channels for
transmissions. You can also assign Trunking priority
Talkgroups.

• Priority Plus Scan – Allows you to scan only priority

channels.

• Unique Data Skip – Allows your scanner to skip unwanted

data transmissions and reduces birdies.

• Memory Backup – If power is disconnected, the

frequencies programmed in your scanner are retained 
in memory.

• Direct Channel Access – Go directly to any channel

without entering the Menu mode.

• Attenuator – Reduces the signal strength on a per

frequency basis.

• PC Programmable – Allows you to easily program all

frequencies and Trunking Talk Groups into your
UBC3300XLT from your PC.
– Remote cable is optional.

• Turbo Search – Increases the search speed to 300 steps

per second. This applies only to transmission bands with 
5 kHz steps.

UBC3300XLT OM  5/14/04  3:29 PM  Page 9