Sharp AR-M257 ユーザーズマニュアル

ページ / 302
6
TROUBLESHOOTING
69
Printing does not take place
(part 4)
Checking the printer driver
■ Is your machine selected correctly in the current 
application for the print job?
Select the printer driver of the machine in the print settings 
window of the application.
If the printer drivers appear as icons, click the icon of the 
machine.
If the printer drivers are selected from a pull-down menu, 
select the printer driver of the machine from the menu.
Windows: 
Macintosh: 
Points to check in Windows
■ Has the printer driver been installed properly?
Follow the steps below to make sure that the printer driver is 
installed correctly.
1 Click the "start" button, click "Control Panel", click 
"Printers and Other Hardware", and then click 
"Printers and Faxes".
On Windows 98/Me/NT 4.0/2000, click the "Start" button, 
select "Settings" and then click "Printers".
On Windows Server 2003, click the "Start" button and then 
click "Printers and Faxes".
2 Check if the "SHARP AR-XXXX" printer driver icon 
is shown.
If the printer icon of the machine does not appear, the printer 
driver is not installed correctly. Follow the instructions in the 
software setup guide for network printer to correctly install the 
printer driver.
■ Is the port configured correctly?
It is possible that there is a problem with the port 
configuration, for example another printer driver may be 
using the port. Open the printer driver properties and 
correctly configure the port that you are using.
See the software setup guide for network printer.
If for some reason the printer driver does not operate 
correctly, delete the printer driver and then reinstall it as 
explained in the software setup guide for network printer.