Radio Shack 20-164 ユーザーズマニュアル

ページ / 62
3.. Press.L/OUT..On.the.display,.“lo”.changes.
to.“LO.”.
4.. To.unlock.a.locked-out.channel,.press.L/
OUT.again.
To review all locked out channels:
1.. Press.MAN..
2.. Repeatedly.pressing.FUNC.and.then.L/OUT.
to.view.each.locked-out.channel..
3.. To.unlock.a.channel,.press.L/OUT..“LO”.
changes.to.“lo.”
4.  When you finish reviewing locked-out 
channels,.press.MAN.
You can manually select any channel in a 
bank, even in turned-off banks.
Priority Scanning
In.addition.to.the.1,000.programmable.memory.
channels,.your.scanner.has.one.Priority.channel..
When.Priority.is.turned.on,.the.scanner.checks.
the.Priority.channel.every.2.seconds..This.lets.
you.scan.without.missing.a.transmission.on.the.
Priority.channel..
Priority scanning does not operate if the 
scanner stops on a trunking transmission. 
Priority check seems random during peak 
hours.
To turn on the priority feature:
1.. Press.PRI.so.“pri”.changes.“PRI”.on.the.
display.during.scanning..
2.. To.turn.off.the.priority.feature,.press.PRI.
again.
To make an existing channel a Priority channel:
1.. Press.MAN.
2.. Use.the.number.keys.to.enter.the.bank.and.
channel.number..
The Priority channel cannot be a trunking 
channel (MOT, ED, or LTR).
3.. Press.MAN.
4.. Press.FUNC,.then.hold.PRI.until.the.display.
blinks.
To modify the Priority channel:
1.. Press.PGM.
2.. Press.PRI.
3.. Use.the.number.keys.to.enter.the.frequency.
4.. Press.ENT.
.
If.the.frequency.is.incorrect,.“Invalid.Freq”.
appears briefly.
Weather Alerts
The.Federal.Communications.Commission.(FCC).
has.allocated.channels.for.use.by.the.National.
Oceanic.and.Atmospheric.Administration.
(NOAA). NOAA broadcasts Specific Area 
Message.Encoding.(SAME).alerts.that.include.
digitally.encoded.data.about.the.severity.of.the.
alert.
Regulatory agencies in other countries 
have also allocated channels for use by 
their weather reporting authorities.
If.you.program.a.weather.channel.as.the.Priority.
channel,.your.scanner.can.detect.the.1050.Hz.
weather.alert.tone..All.alerts.are.received.(FIPS.
settings.are.ignored),.and.the.scanner.stays.on.