Radio Shack 20-164 ユーザーズマニュアル
0
1
Notes
To enter SAME standby:
1
.. Press.FUNC,.and.then.WX..The.scanner.will.
monitor.the.selected.weather.radio.station.
for.alerts.with.FIPS.codes.that.match.the.
codes.you.entered.in.the.FIPS.entry.table..
for.alerts.with.FIPS.codes.that.match.the.
codes.you.entered.in.the.FIPS.entry.table..
2
.. To.exit.SAME.standby,.press.FUNC,.and.
then.WX.
The scanner searches the weather
frequencies while SAME standby mode
when squelch is off.
frequencies while SAME standby mode
when squelch is off.
To test the weather alert:
1.. Press.WX..Your.scanner.scans.through.the.
1.. Press.WX..Your.scanner.scans.through.the.
weather.bands.
2.. Set.the.Squelch.to.the.lowest.setting.so.that.
you.hear.static.
3.. Press.FUNC.and.then.WX..“SAME.Standby”.
appears.
4.. Hold.ENT.for.about.2.seconds..The.display.
indicates.the.type.of.message,.and.the.
scanner.sounds.an.alert.or.series.of.beeps.
scanner.sounds.an.alert.or.series.of.beeps.
5.. Press.any.key.except.LIGHT.to.stop.testing.
Skywarn
Skywarn.is.an.organized.group.of.trained.
weather.observers..Using.Skywarn,.you.can.
hear.trained.observers.in.your.area.call.in.
official reports to a control station that relays
those.reports.to.NOAA.and.other.emergency.
agencies.
weather.observers..Using.Skywarn,.you.can.
hear.trained.observers.in.your.area.call.in.
official reports to a control station that relays
those.reports.to.NOAA.and.other.emergency.
agencies.
Before.using.this.feature,.save.local.Skywarn.
frequencies.for.your.area.into.Channel.999..
frequencies.for.your.area.into.Channel.999..
To use Skywarn:
Hold.the.Skywarn.button.(
Hold.the.Skywarn.button.(
)..“SKY”.appears.
If.the.skywarn.channel.is.empty,.“Not.
programmed”.appears.
programmed”.appears.
Monitoring
When.monitoring,.the.scanner.remains.on.a.
single.channel..
single.channel..
Your scanner features a power save
circuit that allows the scanner to “sleep”
briefly while waiting for a call on a
monitored channel.
circuit that allows the scanner to “sleep”
briefly while waiting for a call on a
monitored channel.
To monitor a channel:
1.. Press.MAN..
2.. Use.the.number.keys.to.enter.the.channel.
1.. Press.MAN..
2.. Use.the.number.keys.to.enter.the.channel.
number.and.press.MAN.
To find a frequency to monitor:
1.. Press.TUNE..The.currently-tuned.frequency.
1.. Press.TUNE..The.currently-tuned.frequency.
and.***.PAUSED.***.appear.
2.. (Optional).Use.the.number.keys.to.change.
the.frequency.and.press.ENT.
3.. Press.PSE..The.scanner.searches.for.a.
frequency..To.change.the.tune.direction,.
press..or.. When the scanner finds an
active.frequency,.it.stops..
press..or.. When the scanner finds an
active.frequency,.it.stops..
4.. Press.PSE.to.monitor.the.frequency..
The transmission signal level is indicated
by the 5 dots.
by the 5 dots.