Canon DS126251 ユーザーズマニュアル

230

You can check the battery’s condition on the LCD monitor. A Battery 
Pack LP-E6 has a unique serial No., and you can register multiple 
battery packs to the camera. When you use this feature, you can check 
the registered battery pack’s remaining capacity and operation history.

 

Under the [7] tab, select [Battery 
info.], then press <0>.

X

The battery info screen will appear.

3

Model of the battery or household power 
source being used.

The battery check (p.28) displays the 
remaining battery capacity in 1% increments.

Shutter count or shots taken with the 
current battery. The number is reset when 
the battery is recharged.

Battery’s recharge performance level is 
displayed in one of three levels.

   (Green): Battery’s recharge 

performance is fine.

   (Green): Battery’s recharge performance 

is slightly degraded.

     (Red): Purchasing a new battery is 

recommended.

Battery position

Do not use any battery other than the Battery Pack LP-E6. Otherwise, the 
camera’s full performance may not be attained or malfunction may result.

 

If you use two LP-E6 battery packs in the Battery Grip BG-E7, battery 
information for the two battery packs will appear.

 

When size-AA/LR6 batteries are used in the Battery Grip BG-E7, only 
the battery check display will be displayed.

 

If for some reason, communication with the battery is not successful, the 
battery check display will show <

> on the LCD panel and in the 

viewfinder. [Cannot communicate with battery] will be displayed. Just 
select [OK] and you can continue shooting.

COP

Y