HP (Hewlett-Packard) 334457003 ユーザーズマニュアル

3. Remove the side access panel. See the section 

 for more 

information on how to access the system board.

4. Remove, if necessary, any hardware that will be replaced.

5. Install any optional equipment. The following options are 

available on select models:

❏

❏

❏

❏

✎

More detailed instructions for installing thin client options are 
included in the option kits.

If it is necessary to replace the internal battery, refer to the 
following section: 

❏

.

6. Replace the side access panel. Refer to the section 

 section for 

instructions on this procedure.

7. Reconnect any external devices and power cords.

8. Turn on the monitor, the thin client, and any devices you want 

to test.

9. Load any necessary drivers.

✎

Many of the drivers necessary for installing optional thin client 
hardware can be found and downloaded from the HP website at 

10. Reconfigure the thin client, if necessary.