HP (Hewlett-Packard) 334457003 ユーザーズマニュアル

If the thin client can be upgraded with optional flash memory, use the 
following instructions as an overview of this procedure.

Ä

CAUTION: If necessary, back up any data before continuing the 
installation.

✎

In addition to following these instructions, follow the detailed 
instructions that accompany the flash memory you have purchased. 

1. Complete steps 1 through 4 of the 

2. Remove any existing flash memory, if installed.

✎

A set of needle-nose pliers may be required when removing the flash 
memory module.

3. Verify the location of the round opening on the flash memory 

card and align it with the plastic stem on the system board.

4. Insert the new flash memory with the connectors facing down as 

shown in the following illustration.

5. Re-attach the side access panel.