Lucent Technologies 555-232-102 ユーザーズマニュアル

DWBS Testing

4-16

Issue 5 June 1999

c. Press the More soft key.

3. Upon completing your walk-through, if you have encountered any

problems, refer to the DWBS Maintenance document for further
investigation.

Procedure: Verifying Operative
Cell IDs

This procedure verifies that all the cells in the wireless configuration are “up” and
providing coverage.

NOTE:

Cell IDs for the 9630 Series WTs update

dynamically. Therefore, the

following procedure is not required for 9630 Series WTs.

1. Move the 9601 WT battery away from its set position slightly; then reinsert

it.

2. For a 9601 WT, using the installation map as a guide, step into the first cell

to be checked, and position yourself close to the CAU (or to the WFB, if no
CAUs are present) for the particular cell. Obtain the cell ID by executing the
following key sequence on the 9601 WT:

a. Press

b. Press

c. Press the Info

soft key.

d. Press

to display the cell ID.

3. Confirm that the cell ID is displayed. If the cell ID is displayed, repeat

Step 1 for all the cells in the configuration. If there is no cell ID displayed,
use the following table:

If...

Then...

Unit is a CAU

Go to Step 3

Unit is a WFB

Go to Step 4