Soyo SY-7IZB+ ユーザーズマニュアル

Press <Enter> to save the new configuration to the CMOS memory,

and continue the boot sequence.

l What should I do if the Motherboard refuses to start?

The 66MHz setting is used as default so whenever the BIOS

settings are erased or reset, the board will be able to boot up.

If the CPU frequency was set too high and the Motherboard refuses

to start up, you can always load the default values by pressing the

[Ins] key during boot up.

There are two possible ways to turn off the system:

1. Use the Shutdown command in the Start Menu of Windows

95/98 to turn off your computer.

2. Press the mechanical power-button and hold down for over 4

seconds, to shutdown the computer. If you press the power-

button for less than 4 seconds, then your system will enter into

You are now ready to configure your system with the BIOS setup

program. Go to Chapter 3: BIOS SETUP