Polycom RMX 2000 ユーザーズマニュアル

First Time Installation and Configuration of the Polycom RMX 2000 

consists of the following procedures:
1

—

Mount the RMX in a rack.  

—

Connect the necessary cables.

—

Get the information needed for integrating the RMX into the 

local network.

—

Power up and register the RMX. 

—

Modify the Management Network. 

—

Configure the Default IP Service.

The RMX unit should be mounted in a 19”rack in a well ventilated area. It 

is important to adhere to the Site Requirements as described in the RMX 

2000 Hardware Guide, "Site Requirements” on page

There are two methods for installing the RMX in a rack:
•

Using rack brackets – Install rack brackets, supplied by the rack 

manufacturer, in the rack. Mount the RMX on top of the rack 

Hardware

Installation

and

Setup

Gather Network

Equipment

and

Address Info

First Entry

Configuration