Panasonic HDC-SD40 ユーザーズマニュアル

≥ Connect this unit to the PC after the software applications are installed.
≥ Remove the supplied CD-ROM from your PC.

A USB cable (supplied)
≥ Insert the plugs as far as they will go.

≥ It is possible to use it connected to the PC with the batteries only, but you will not be able to 

write data into the unit. Use the AC adaptor to free you from worrying about the battery 
running down.

≥ This function is available in all modes.

≥ The USB function selection screen will appear.

≥ The Smart wizard screen is automatically displayed when HD Writer LE 1.0 is installed.
≥ This unit is automatically recognised as an external drive of the PC. (

≥ When you select an option other than [PC], reconnect the USB cable.
≥ When using the battery, the LCD monitor turns off after about 5 seconds. Press the cursor 

button to turn the LCD monitor on.

≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed 

with any other USB cables.)

≥ When this unit is connected to a PC using a USB cable while the unit is turned on, power is 

also supplied from the PC to this unit.

≥ When the unit is connected to a PC it cannot be turned off.

≥ When performing reading/writing between a PC and an SD card, be aware that some SD 

card slots built into PCs and some SD card readers are not compatible with the SDHC 
memory card or SDXC memory card.

≥ When using an SDXC Memory Card, check the following support site.

