Schneider Electric TSXCUSBMBP ユーザーズマニュアル
Configuring the TSXCUSBMBP Driver
35011984 02/2006
31
Entering Routing
Paths into the
Routing Table
Paths into the
Routing Table
Use the following procedure to change an entry in the Routing Table:
Step Action
1
Select Routing from the top level menu on the TSXCUSBMBP Driver Interface window.
2
Select the entry to be changed in the table by left clicking on it (the entry will become
highlighted)
highlighted)
3
Enter the Modbus ID and the associated Modbus Plus Routing Path in the fields below
the table.
the table.
4
Click on the Update button to update that entry in the table. You will see the entry in
the table above change to the new values.
the table above change to the new values.
5
Repeat steps 2-4 for each entry to change in the Routing table.
Note: Clicking on the Close button will save all Routing Table entries and return to the
top level menu. The new Routing Table will take effect immediately.
top level menu. The new Routing Table will take effect immediately.