Schneider Electric TSXCUSBMBP ユーザーズマニュアル
35011984 02/2006
19
4
Establishing a Connection to the
TSXCUSBMBP
TSXCUSBMBP
At a Glance
Subject of this
chapter
chapter
The TSXCUSBMBP Driver is added to the Startup group during installation. After restarting
the computer at the end of the hardware installation, the driver will automatically start and will
continue to do so each time the computer is powered up or restarted.
If the TSXCUSBMBP Driver is ever removed from the Startup menu, you will need to
start the driver manually by going to the Programs menu and selecting Schneider Electric
then TSXCUSBMBP then TSXCUSBMBP Driver. The TSXCUSBMBP Driver allows for
only one instance of it to run at any time, so starting it multiple times is not a concern.
the computer at the end of the hardware installation, the driver will automatically start and will
continue to do so each time the computer is powered up or restarted.
If the TSXCUSBMBP Driver is ever removed from the Startup menu, you will need to
start the driver manually by going to the Programs menu and selecting Schneider Electric
then TSXCUSBMBP then TSXCUSBMBP Driver. The TSXCUSBMBP Driver allows for
only one instance of it to run at any time, so starting it multiple times is not a concern.
Status of the
Driver
Driver
When the TSXCUSBMBP Driver is running, an icon will appear in the system tray of
the computer to indicate the status of the driver, as shown in the table below.
the computer to indicate the status of the driver, as shown in the table below.
What's in this
Chapter?
Chapter?
This chapter contains the following topics:
Icon
Color
Status of the driver
normal
A TSXCUSBMBP was found.
red
No TSXCUSBMBP was found.
yellow
A TSXCUSBMBP was found, and is in the process of initializing and
connecting to a Modbus Plus network.
connecting to a Modbus Plus network.
Topic
Page
Rescan Adapters
Show Interface