Panasonic WJ-GXE500E 操作ガイド
55
*12
• When "Bandwidth control(bit rate)" on the [Network] tab of the "Network" page is set low, taking a picture
using the one shot button may not function depending on the use environment. In this case, select
"QVGA" for "Image capture size" of "JPEG" on the [JPEG/H.264] (☞ page 34) (or [JPEG/MPEG-4]
(☞ page 37)) tab or set "Image quality" of "JPEG" lower.
"QVGA" for "Image capture size" of "JPEG" on the [JPEG/H.264] (☞ page 34) (or [JPEG/MPEG-4]
(☞ page 37)) tab or set "Image quality" of "JPEG" lower.
Note:
• Refer to the network administrator for the addresses of each server.
• The port forwarding function changes a global IP address to a private IP address, and "Static IP masquerade"
• The port forwarding function changes a global IP address to a private IP address, and "Static IP masquerade"
and "Network Address Translation (NAT)" have this function.This function is to be set in a router.
• To access this unit via the Internet by connecting the unit to a router, it is necessary to assign a respective HTTP
port number for each device and address translation by using the port forwarding function of the router. Refer to
the operating instructions of the decoder for further information.
the operating instructions of the decoder for further information.
[DDNS] tab
Refer to page 29 for general information about this tab.
Setup items
Setting values (Underlined: default)
DDNS
On/Off
Host name
(Default: None (blank))
User name
(Default: None (blank))
Password
(Default: None (blank))
Access interval
1min/10min/30min/1h/6h/24h
• When communicating using IPv4, obtain a global IP address from the DHCP server. To access this unit via the
Internet, it is necessary to configure the settings for the DDNS function. When using the DDNS function, it is
possible to access with "Host name registered in the DDNS server.nmdns.net". To use the DDNS function, it is
necessary to connect to the dedicated DDNS server. Refer to the web site for further information about the
DDNS. Refer to the readme file on the provided CD-ROM for the web site.
possible to access with "Host name registered in the DDNS server.nmdns.net". To use the DDNS function, it is
necessary to connect to the dedicated DDNS server. Refer to the web site for further information about the
DDNS. Refer to the readme file on the provided CD-ROM for the web site.
Enter [Global IP address + :
(colon) + port number] in the
"Address" box of the browser
via the Internet.
WAN
Global address
vvv.xxx.yyy.zzz
LAN
Private address
192.168.0.254
vvv.xxx.yyy.zzz:82
vvv.xxx.yyy.zzz:81
Router
Internet
(WAN)
Cable modem
xDSL modem
Address translation using the port
forwarding function
vvv.xxx.yyy.zzz:82 → 192.168.0.2:82
Address translation using the port
forwarding function
vvv.xxx.yyy.zzz:81 → 192.168.0.1:81
Private address
192.168.0.2
Port number: 82
Private address
192.168.0.1
Port number: 81
ACT
OPERATE
LINK
SD CARD
ERROR
Network Video Encoder
WJ-GXE500
ACT
OPERATE
LINK
SD CARD
ERROR
Network Video Encoder
WJ-GXE500