3M 1420EZ ユーザーズマニュアル
16
78-9000-0120-3-A
Read and Write Failures
ERROR: When the Read and Write button is clicked, and iD-Markers are read with any of the above errors, the following
error message may be displayed and the write process is stopped.
error message may be displayed and the write process is stopped.
REMEDY: See appropriate remedy in Read Failures section above.
ERROR: If all the iD-Markers are read and written, but an iD-Marker failed in verification,
is displayed in the
Verify
column for that iD-Marker. Clicking on the magnifying glass icon, displays the following error message dialog box.
REMEDY: Rewrite iD-Marker. If it fails again, remove it from the Dynatel
™
1420EZ Stand and replace with a
different iD-Marker.
ERROR: If the value of Number of Markers in the Fixture box is not the same as the value of Markers Read box, then the
following dialog box is displayed.
following dialog box is displayed.
REMEDY: Identify the iD-Marker with the error, indicated by the
, repeat the Read and Write operation. If it
fails again, remove it from the Dynatel
™
1420EZ Stand and replace with a different iD-Marker and repeat operation.