ZyXEL Access Point G1000 v2 91-005-124001B ユーザーズマニュアル
製品コード
91-005-124001B
ZyXEL G-1000 v2 User’s Guide
Chapter 3 Wizard Setup
47
3.3.4 Apply Settings
If you changed the SSID on your device or implemented any security, then you will have to
make the corresponding changes on your wireless station to reconnect to the G-1000 v2.
make the corresponding changes on your wireless station to reconnect to the G-1000 v2.
The following table describes the labels in this screen.
Note: If you changed the SSID on your device or implemented any security, then you
will have to make the corresponding changes on your wireless stations to
reconnect to the AP.
reconnect to the AP.
If you changed the IP address of your G-1000 v2 or if an IP address is assigned
to the G-1000 v2 automatically, you can access the device by using the new IP
address or typing “http://zyxelXXXX” (where XXXX are the last four digits of
your devices MAC address) in your browser. The MAC address can be found
on the back label of your G-1000 v2.
to the G-1000 v2 automatically, you can access the device by using the new IP
address or typing “http://zyxelXXXX” (where XXXX are the last four digits of
your devices MAC address) in your browser. The MAC address can be found
on the back label of your G-1000 v2.
Congratulations, you have completed your configuration wizard. Click Finish to exit the
wizard.
wizard.
Table 13 Apply Settings
LABEL
DESCRIPTION
Back
Click Back to display the previous screen.
Apply
Click Apply to save your configuration settings.
Exit
Click Exit to quit the wizard without saving the changes.