ZyXEL Access Point G1000 v2 91-005-124001B ユーザーズマニュアル

ZyXEL G-1000 v2 User’s Guide

Chapter 4 Wireless LAN

51

• In the AP: this feature is called a local user database or a local database.
• In a RADIUS server: this is a server used in businesses more than in homes.

If your AP does not provide a local user database and if you do not have a RADIUS server, 
you cannot set up user names and passwords for your users.

Unauthorized devices can still see the information that is sent in the wireless network, even if 
they cannot use the wireless network. Furthermore, there are ways for unauthorized wireless 
users to get a valid user name and password. Then, they can use that user name and password 
to use the wireless network.

Local user databases also have an additional limitation that is explained in the next section.

Wireless networks can use encryption to protect the information that is sent in the wireless 
network. Encryption is like a secret code. If you do not know the secret code, you cannot 
understand the message.

The types of encryption you can choose depend on the type of authentication. (See 

 for information about this.)

For example, if the wireless network has a RADIUS server, you can choose IEEE 802.1x, 
IEEE 802.1x + Static WEP, IEEE 802.1x + Dynamic WEP, WPA or WPA2. If users do not 
log in to the wireless network, you can choose no encryption, Static WEP, WPA-PSK, or 
WPA2-PSK.

Usually, you should set up the strongest encryption that every device in the wireless network 
supports. For example, suppose you have a wireless network with the G-1000 v2. The G-1000 
v2 does not have a local user database, and you do not have a RADIUS server. Therefore, 
there is no authentication. Suppose the wireless network has two devices. Device A only 
supports WEP, and device B supports WEP and WPA. Therefore, you should set up Static 
WEP in the wireless network.

Table 14   Types of Encryption for Each Type of Authentication

None