HP (Hewlett-Packard) 354903-001 ユーザーズマニュアル

 

message seeking to initiate Controller Firmware Auto Cloning.  

To update the firmware on the server, controller, or hard drives, use Smart 
Components. These components are available on the Firmware Maintenance CD. 
A more recent version of a particular component might be available on the 
support page of the HP website (

). Components for 

controller and hard drive firmware updates are also available from the software 
and drivers page for storage products 
(

1.  Find the most recent version of the component that you require. Components 

for controller firmware updates are available in offline and online formats. 

2.  Follow the instructions for installing the component on the server. These 

instructions are given with the CD and are provided on the same Web page 
as the component.  

Follow the additional instructions that describe how to use the component to 
flash the ROM. These instructions are provided with each component. 

 

The Recovery ROM feature stores two complete firmware images in the ROM: 
one active image and one backup image. When the controller is powering up, it 
checks both firmware images to be sure they are valid. If either image is invalid, 
the system overwrites the invalid image with the valid image. 

This process, commonly called auto-flashing, is performed automatically by the 
controller and does not require any user intervention. The controller display 
provides messages for the status of this process. 

 

In a redundant controller configuration, both controllers must execute the same 
version of firmware. During power up (or when a redundant controller is 
installed as a hot-plug procedure), the storage system compares the controller 
firmware versions. If the versions differ, the controller displays a user input