DeWALT DW443 ユーザーズマニュアル
1
English
WARNING! Read all instructions. Failure to follow all
instructions listed below may result in electric shock, fire
instructions listed below may result in electric shock, fire
and/or serious injury. The term “power tool” in all of the warn-
ings listed below refers to your mains-operated (corded) power
tool or battery-operated (cordless) power tool.
ings listed below refers to your mains-operated (corded) power
tool or battery-operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b) Do not operate power tools in explosive atmospheres, such
as in the presence of flammable liquids, gases or dust.
Power tools create sparks which may ignite the dust or fumes.
Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify the
plug in any way. Do not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs and matching out-
lets will reduce risk of electric shock.
(grounded) power tools. Unmodified plugs and matching out-
lets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is earthed or
grounded.
is an increased risk of electric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock
d) Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock. Replace or
repair damaged cords. Make sure your extension cord is in good
condition. Use only 3-wire extension cords that have 3-prong
grounding-type plugs and 3-pole receptacles that accept the
tool’s plug.
from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock. Replace or
repair damaged cords. Make sure your extension cord is in good
condition. Use only 3-wire extension cords that have 3-prong
grounding-type plugs and 3-pole receptacles that accept the
tool’s plug.
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR
ANY D
ANY D
E
WALT TOOL, CALL US TOLL FREE AT:
1-800-4-D
E
WALT (1-800-433-9258)
1
R
SANDING PAD
(HOOK AND LOOP - DW442 AND DW443)
(PSA- PRESSURE SENSITIVE ADHESIVE - DW441 AND DW444)
DUST BAG
SPEED CONTROL DIAL
(DW443 AND DW444)
ON/OFF SWITCH
SHROUD