Porter-Cable 7724 ユーザーズマニュアル

d) Remove any adjusting key or wrench before turning the power tool 

on. A wrench or a key left attached to a rotating part of the power tool 
may result in personal injury.

e) Do not overreach. Keep proper footing and balance at all times. This 

enables better control of the power tool in unexpected situations.

f)  Dress properly. Do not wear loose clothing or jewelry. Keep your

hair, clothing and gloves away from moving parts. Loose clothes, 
jewelry or long hair can be caught in moving parts.

g) If devices are provided for the connection of dust extraction and 

collection facilities, ensure these are connected and properly used.
Use of these devices can reduce dust-related hazards.

a) Do not force the power tool. Use the correct power tool for your 

application. The correct power tool will do the job better and safer at the

rate for which it was designed.

b) Do not use the power tool if the switch does not turn it on and off.

Any power tool that cannot be controlled with the switch is dangerous 
and must be repaired.

c)  Disconnect the plug from the power source before making any 

adjustments, changing accessories, or storing power tools. Such 
preventive safety measures reduce the risk of starting the power tool 
accidentally.

d) Store idle power tools out of the reach of children and do not allow 

persons unfamiliar with the power tool or these instructions to 
operate the power tool. Power tools are dangerous in the hands of 
untrained users.

e) Maintain power tools. Check for misalignment or binding of moving 

parts, breakage of parts and any other condition that may affect the
power tools operation. If damaged, have the power tool repaired 
before use. Many accidents are caused by poorly maintained power 
tools.

f)  Keep cutting tools sharp and clean. Properly maintained cutting tools

with sharp cutting edges are less likely to bind and are easier to control.

g)  Use the power tool, accessories and tool bits etc., in accordance 

with these instructions and in the manner intended for the 
particular type of power tool, taking into account the working 
conditions and the work to be performed. Use of the power tool for 
operations different from those intended could result in a hazardous 
situation.

a) Have your power tool serviced by a qualified repair person using only

identical replacement parts. This will ensure that the safety of the 
power tool is maintained.