Multiquip CD613H18 (Honda GX390 Gasoline Engine) ユーザーズマニュアル

4. Place the

 Choke Lever (Figure 14) in the "CLOSED  "

position.

DO NOT attempt to operate the saw until
the Safety, General Information and
Inspection sections of this manual have
been read and  thoroughly understood.
Depending on  engine manufacturer,
operating steps may vary. See engine
manufactures operating manual.

1.

Ensure the diamond blade has been mounted correctly and
that it is raised above the surface you are about to saw.

2.

Place the 

fuel valve lever (Figure 12) to the "ON" position.

3.

Place the 

Engine ON/OFF switch (Figure 13) in the "ON"

position.

The  CLOSED position of the

choke lever enriches the fuel

mixture for starting a COLD engine.

The OPEN position provides the

correct fuel mixture for normal

operation after starting, and for

restarting a warm engine.

The engine speed has
been set at the factory.
Changing the governor

speed could damage the
blade and/or the saw.

 NOTE

NEVER operate the saw in
a confined area or
enclosed area structure
that does not provide ample

free flow of air.

ALWAYS wear approved eye and hearing
protection before operating the saw.

NEVER place hands or feet inside the belt
guard or blade guard while the engine is
running.   ALWAYS shut the engine down
before performing any kind of maintenance
service on the saw.