Southbend SB1020 ユーザーズマニュアル

For Machines Mfg. Since 8/09

Model SB1020

-19-

Refer to Figures 13–15 and the following 

descriptions to become familiar with the basic 

controls and components used to operate this 

machine.

A.  Blade tension Knob: Applies or releases 

blade tension.

B.  Blade tension gauge: Displays blade 

tension.

C.   guide post Lock Screw: Locks the guide post 

in the position set by the operator.

D.  Control panel: Controls the electrical 

components of the machine. 

E.  Downfeed Rate Adjust Knob: Controls the 

speed at which the blade lowers into the cut.

F.  Downfeed Valve: Controls the starting and 

stopping of the headstock downfeed.

g.  Work Stop: An adjustable stop for cutting 

multiple workpieces at the same length.

H.  Vise Slide Lock Lever: Locks the vise in the 

position set by the operator.

i.  Swivel Lock Handle: Locks the headstock in 

the position set by the operator.

J.   Vise Handwheel: Controls the vise jaw 

movement. 

K.  Headstock Handle: Serves as a lift-point for 

the headstock.

L.  Vise Jaw Quick Release Lever:  Releases the 

vise leadscrew so the vise can quickly open 

or close without the use of the handwheel.

M.  indicator Lamp: Lights when the saw is ON.

N.  Variable Blade Speed Knob: Adjusts the 

blade speed.

O.  ON Button: Starts the saw and coolant pump.

p.  Main power Switch: Turns the saw ON/OFF.

Q.  Emergency Stop Button: Cuts power to the 

motor.