Southbend SB1020 ユーザーズマニュアル

-28-

For Machines Mfg. Since 8/09

Model SB1020

The upper blade guide should adjusted to 

approximately 

1

⁄

4

" away from the workpiece. 

The support provided by having the blade guide 

close to the workpiece ensures straight cuts and 

reduces blade tendency to twist or drift.

1.  DISCONNECT BANDSAW FROM POWER!

2.  Loosen the cap screw in Figure 31 and slide 

the blade guide to approximately 

1

⁄

4

" away 

from the workpiece, then re-tighten the cap 

screw.

The Model SB1020 has a vise quick release 

handle that allows the operator to quickly 

adjust the opening of the jaws without the use 

of the handwheel. Rotate the handle clockwise 

to disengage the vise leadscrew, then slide the 

vise open or closed as needed. To re-engage the 

leadscrew, release the vise quick release handle.

Figure 33 shows the correct methods for holding 

different workpiece shapes.