Craftsman 509347 ユーザーズマニュアル

This manual has safety information and 
instructions to help users eliminate or 
reduce the risk of accidents and injuries, 
including:

1. Severe cuts, and loss of fingers or other 
body parts due to contact with the blade.

2. Eye impact injuries and blindness, from 
being hit by a thrown workpiece, workpiece 
chips or pieces of blade.

3. Bodily impact injuries, broken bones and 
internal organ damage from being hit by a 
thrown workpiece.

4. Shock or electrocution.

5. Burns.

An exclamation mark inside a triangle is the 
safety alert symbol.

It is used to draw attention to safety infor-
mation in the manual and on the saw. It is 
followed by a signal word, DANGER, 
WARNING or CAUTION, which tells the 
level of risk:

 means if the safety informa-

tion is not followed someone will be seri-
ously injured or killed.

 means if the safety informa-

tion is not followed someone could be seri-
ously injured or killed.

 means if the safety informa-

tion is not followed someone may be injured.

Three major hazards are associated with 
using the radial arm saw for ripping. They 
are outfeed zone hazard, kickback and 
wrong way feed.

This section only briefly explains these haz-
ards. Read the ripping and crosscutting 
safety sections for more detailed explana-
tions of these and other hazards.

If you reach around the blade to the outfeed 
side when ripping, and try to hold down or 
pull the workpiece through to complete a cut, 
the rotational force of the blade will pull your 
hand back  into the blade.

Fingers will be cut off.