Chicago Electric 42933 ユーザーズマニュアル

SKU 42933 

Page 7

note: Straight style (traditional) stick shown.  A dif-

ferent stick design may be used if it properly 

protects against all hazards. 

Push sticks must be made from sturdy, defect-free, 

•  

plywood or normal wood to prevent unexpected 

breakage.  Material must be at least 1/4” thick ,but 

no thicker than the finished wood.

Inspect push stick before use and do not use a 

•  

damaged or deteriorated push stick.

Push stick dimensions will vary depending 

•  

on the application and user.

Must be far 

•  

enough down 

the stick to allow 

a comfortable and 

firm grip.
Must be deep enough 

•  

to prevent hand from 

slipping down the 

stick.
Do not cut more than 

•  

halfway into the stick 

to prevent weakening.
Corners may be 

•  

rounded to increase 

comfort.

Must be long enough 

•  

to prevent accidental 

blade contact.
At least 6” from end of 

•  

handle to closest part 

of notch.

Must be right angle cut 30°-40° from the angle of the stick to 

•  

keep hands out of the line of the blade.
The lower lip of the notch must be no longer than the workpiece 

•  

is thick.