Chicago Electric 69276 ユーザーズマニュアル

Page 9

Item 69276 

        

1.  The Auxiliary Handle can be placed in a variety of positions.

2.  To adjust the Auxiliary Handle, turn the Handle 

counterclockwise to loosen the band. Slide the Handle 

on or off the Rotary Hammer or to the desired position 

then turn the Handle clockwise to secure it in place.

1.  The Depth Gauge can only be used if the Auxiliary Handle 

is in place and positioned on either side or the top of the 

Rotary Hammer. The body of the Hammer will interfere with 

the Depth Gauge if the Handle is in the bottom position.

2.  Press and hold the Lock Button and slide the Depth Gauge 

through the Depth Gauge Slot on the Auxiliary Handle. 

3.  Position the Depth Gauge as needed, then release the Lock 

Button to secure the Depth Gauge in place.

1.  Adjust the Function Dial before using the Rotary Hammer. 

To adjust the Function Dial, press the Dial Release 

Button on the Function Dial handle and rotate the dial 

until it clicks in place at one of the three positions.

CautiOn: Move the Function Dial only when the 

Motor is stopped. Attempting to move the Function 

Dial while the Motor is engaged will result in abrupt 

Bit rotation and can cause property damage.

CautiOn: When moving the Function Dial, make sure the 

Dial clicks into the desired position. If not actively engaged, 

the Dial could slip out of position resulting in tool damage.

2.  To Drill: Rotate the Function dial to the Drill setting. 

The Rotary Hammer will revolve when powered.

3.  To Hammer/Drill: Rotate the Function Dial to 

the Hammer/Drill setting. The Rotary Hammer 

will revolve and hammer when powered.

4.  To Chisel: Rotate the Function Dial to the Hammer setting. 

The Rotary Hammer will hammer when powered.

Auxiliary Handle

Band

Bracket

Lock Button

Depth Gauge Slot

Function 

Dial

Drill 

Setting

Hammer/Drill Setting

Hammer 

Setting

Dial 

Release 

Button