Graco Inc. 310876 ユーザーズマニュアル

The sprayer cord includes: a grounding wire with an 
appropriate grounding contact.

The sprayer requires: 
110-120V Units: 100-130VAC, 50/60 Hz, 11A, 1 phase, 
circuit with a grounding receptacle. 

240V Units: 210-255 VAC, 50/60 Hz, 7.5A, 1 phase, cir-
cuit with a grounding receptacle. 

Never use an outlet that is not grounded or an 
adapter. 

Do not use the sprayer if the electrical cord has a dam-
aged ground contact. Only use an extension cord with 
an undamaged ground contact. 

Recommended extension cords for use with this 
sprayer:

•

110-120V: 3-wire, 12 AWG (2.5 mm

2

) minimum, 300 

ft. (90 m) maximum length.

•

240V: 3-wire, 16 AWG (1.0 mm

2

) minimum, 300 ft 

(90 m) maximum length.

 

ground through connection to a properly 

grounded fluid hose and pump.

Fluid supply container: follow local code.

Solvent and Oil-based fluids: follow local code. Use 
only conductive metal pails placed on a grounded sur-
face such as concrete. Do not place the pail on a non-
conductive surface such as paper or cardboard, which 
interrupts grounding continuity.

Grounding the metal pail: connect a ground wire to the 
pail by clamping one end to pail and other end to ground 
such as a water pipe.

To maintain grounding continuity when flushing or 
relieving pressure: hold metal part of the spray gun 
firmly to the side of a grounded metal pail, then trigger 
the gun.

Your system must be grounded. Read warnings, page 
3.

Smaller gauge or longer extension cords may 
reduce sprayer performance.