Wagner SprayTech 9185G ユーザーズマニュアル

 

19 

  •  Soft bristled brush

  •  Light household oil

  •  Warm, soapy water if using latex material

  •  Mineral spirits for oil based material

  •  Wrench
ImPORTANT:  DO NOT use any silicone-

  1.  Peform the Pressure 

  5.   Install gun filter tapered-

end first. Reassemble 

spray gun.

  4.   Pour a few drops of light 

household oil inside gun 

housing.

  2.   Pull trigger guard to separate 

from filter housing and unscrew 

housing using a wrench.

Note:  Tighten the wrench over the 

wrench flats (a).

  6.   Line up the tabs (b) on the 

spray tip with the slots in the 

guard assembly.

    Slide the tip into the guard.

  3.   Remove filter from spray gun. 

    Clean spray tip and filter with soft 

bristled brush and appropriate 

cleaning solution.

  7.   Install spray tip and guard 

assembly.

    Move on to Long Term 

Storage, page 20.