Wagner SprayTech 9185G ユーザーズマニュアル

ページ / 28
English
 
Proper use 
and functions
Start
Controls and Functions
Sprays a variety of paints (oil-based and 
latex), primers, stains, preservatives and other 
nonabrasive materials.
Do not use. . .
This pump should not be used with textured 
materials, block filler, asphalt sealer or 
materials containing HHC. See coating supplier 
if flash point is not listed on the container
Safety features:
Spray gun trigger lock and pressure diffuser; 
built-in tip safety guard; PRIME/SPRAY knob 
for safe pressure release. 
Specifications:
Power .................................Ruitao 37.7 cc 
engine, 1.6 Hp
Gas capacity .......................0.65 l 
(approximately 1 
hour spraying time)
Oil capacity .........................0.08 l
Maximum pressure .............3000 PSI
Flow rate .............................0.33 gal/min (1.25 l)
Max tip size.........................0.017”
Capability:
PRIME/SPRAY knob:
The PRIME/SPRAY knob directs 
material to the material return 
tube when set to PRIME or to 
spray hose when set to SPRAY.
DirectLink™:
Spraying pressure is determined 
by the motor throttle.  The throttle 
is regulated by adjusting the 
DirectLink™ pressure control 
knob.  The higher the throttle, the 
higher the spraying pressure.   
VersaTip spray tip:
The VersaTip spray tip can be 
adjusted based on your spraying 
needs.
Trigger lock:
Engage the trigger lock whenever 
the gun is not in use.  
 
GS-07 - 
The gun is locked 
when the trigger lock is at a 
90º angle (perpendicular to the 
trigger in either direction).
Suction tube (a):
The suction tube draws the fluid 
from the original container into 
the pump.
Material return tube (b):
Fluid is sent out through the 
return tube and back into the 
original container when the 
PRIME/SPRAY knob is in the 
PRIME position.
Spray hose:
The spray hose connects the 
spray gun to the pump.
Spray gun:
The spray gun controls the 
delivery of the material being 
pumped.
AutoOiler:
The AutoOiler is designed to 
provide lubrication to the fluid 
section of the pump.  
Sureflo Valve:
The Sureflo Valve is designed 
to keep the inlet valve open and 
from sticking to dried materials.  
The Sureflo Valve is activated 
manually by the user.
Collapsible handle:
The cart handle can be collapsed 
for easier storage.  
Turn the cart knobs counter-
clockwise to unlock the handle.
Turn the cart knobs clockwise to 
lock the handle into place.  
Burn hazard.  When collapsed, 
the cart handle is very close to 
the exhaust port of the engine,
which can be very hot after 
use.  It is recommended that 
the cart handle NOT be 
collapsed until after the engine 
has cooled.
(a)
(b)
SPRAY
PR
IM
E
GS-07
WIDE
NARROW