Multiquip 8FP Series ユーザーズマニュアル

 

 

 

skill/common sense may dictate that a different type of 
machine (with characteristics of higher purchase cost, 
being mounted to a  carrier vehicle, with greater 
horsepower and less mobility), method and/or process 
be utilized to properly complete the job with the degree 
of efficiency and safety required. Contact the 
Customer Service Department for specific information 
regarding suitable job applications, job sites surface 
conditions  and operator experience/skill/common 
sense recommendations for this FLOOR PLANER 
BEFORE utilization. There is no charge for this 
service. 
 
MAINTENANCE, REPAIR AND STORAGE. 
 
1) Use only genuine, approved replacement parts and 
accessories for maintenance  and repair. Use of parts 
and accessories manufactured by others can result in 
property damage and/or personal injury. 
 
2) Follow the 

Service instructions as outlined in the 

appropriate section of this manual. 
 
3) Always stop the engine or electric motor and 
disconnect the spark plug wire or power source cable 
BEFORE checking or working on the FLOOR 
PLANER. 
 
4) Always properly maintain the FLOOR PLANER. 
Frequently check all fasteners  and individual parts. 
Built in safety features  are effective only if they are 
maintained in good working condition. Replace  any 
questionable part or assembly with a genuine, factory 
approved, replacement part. Do not forsake proper 
maintenance for the price of a few replacement parts. 
Proper maintenance does not cost...it actually pays 
dividends. Do not attempt  any maintenance repair 
work not described in this manual. Have such work 
performed at your dealer's service facility. 
 
5) A worn or damaged engine muffler is a fire hazard 
and may cause loss of hearing. Check to see that the 
muffler is in good condition. If the muffler is equipped 
with  a spark  arresting device, determine that it is in 
proper working condition at regular service intervals. 
Replace the spark  arresting device with an  approved 
replacement if there is any question of it integrity. It is 
the responsibility of the owner(s) and/or operator(s) to 
provide for and properly maintain  a USDA approved, 
spark  arresting muffler in an operating  area specified 
by law. Check with appropriate governing agencies for 
more specific information. The FLOOR PLANER must 
not be operated if the muffler is faulty or has been 
removed. Contact with a hot engine muffler can cause 
property damage and/or personal injury. 
 
 

 
 
6) Do not operate the FLOOR PLANER without the 
use of factory  approved V-belt and diamond blade 
guards that  are maintained in proper structural 
condition. 
 
7) Maintain  all safety  and operation decals in proper 
condition. If any decal becomes damaged  and/or 
unreadable, replace with genuine, factory  approved, 
replacement parts only. 
 
8) The Floor Planer utilizes self locking hexagon head 
nuts to minimize the effects of vibration. Replace  all 
self locking hardware with genuine, factory  approved, 
replacement parts only.  
 
9) Consult the material supplied by the engine or 
electric motor manufacturer for specific information 
relative to proper  operational, lubrication and storage 
requirements.