Multiquip MRH-800DS ユーザーズマニュアル
PAGE 20 — MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV. #3 (02/02/05)
Figure 5. MVH-402DSB Engine Components
ENGINE COMPONENTS
Figure 5 illustrates the location of the major engine
components of the machine. Each component is described
below:
components of the machine. Each component is described
below:
1.
Fuel Filler Cap – Remove this cap to add unleaded
gasoline to the fuel tank. Make sure cap is tighten securely.
DO NOT over fill.
gasoline to the fuel tank. Make sure cap is tighten securely.
DO NOT over fill.
2.
Fuel Tank – Diesel engine holds 5.8 quarts of diesel fuel.
3.
Air Cleaner – Prevents dirt and other debris from entering
the fuel system. Remove wing-nut on top of air filter
cannister to gain access to filter element.
the fuel system. Remove wing-nut on top of air filter
cannister to gain access to filter element.
4.
Muffler – Used to reduce noise and emissions.
5.
Recoil Starter (pull rope) – Type of engine starting method.
Alternate type would be electric start (ignition key).
Alternate type would be electric start (ignition key).
6.
Recoil Starter – Housing for pull rope and starter.
7.
Oil Filler Cap/Dipstick – Remove this cap to add oil to the
oil tank. Use dipstick to check oil level.
oil tank. Use dipstick to check oil level.
8.
Oil Drain Plug – Unscrew plug to drain oil from engine
crankcase. Dispose of oil in a safe manner.
crankcase. Dispose of oil in a safe manner.
9.
Decompression Lever – Press down before starting
engine. To prevent damage to the engine, DO NOT use for
any other purpose.
engine. To prevent damage to the engine, DO NOT use for
any other purpose.
10. Fuel Cock – Controls the flow of diesel fuel to the engine.
Must be in the ON position when starting and running the
engine.
engine.
MRH-800DS— ENGINE COMPONENTS