Multiquip R2000H ユーザーズマニュアル

1. Sit down in the operator's seat.

2. Before starting engine, make sure the immediate area is free

of obstructions and debris that may lay in the roller's path.

3. Make sure that  the roller's transmission control  lever (Figure

10) is placed in the 

neutral position.

1. Place the  engine 

fuel valve lever (Figure 11) to the "ON"

position.

2

Rotate the 

throttle lever (Figure 12) halfway between fast

and 

slow for starting.  The engine governor speed is factory

set to ensure optimum  operating speeds.

DO NOT attempt to operate the roller until the
Safety, General Information and Inspection
sections have been read and understood.

3. Place the

 Choke Lever (Figure 13 in the "CLOSED  "

position.

The  CLOSED position of the

choke lever enriches the fuel

mixture for starting a COLD engine.

The OPEN position provides the

correct fuel mixture for normal

operation after starting, and for

restarting a warm engine.

 NOTE

 NOTE

NEVER operate the roller with the

access cover open. Keeping the

cover closed will prevent dirt and

debris from entering into the

transmission and drivetrain

assemblies.  ALWAYS keep the

operation.