Multiquip MDR-9DYE ユーザーズマニュアル

Figure 7 illustrates the location of the major engine
components of the Yanmar engine. Each component is
described below:

1.

Fuel Filler Cap – Remove this cap to add unleaded
gasoline to the fuel tank. Make sure cap is tighten securely.
DO NOT over fill.

2.

Fuel Tank –  Diesel engine holds  5.8 quarts of diesel fuel.

3.

Air Cleaner – Prevents dirt and other debris from entering
the fuel system. Remove wing-nut on top of air filter
cannister to gain access to filter element.

4.

Muffler – Used to reduce noise and emissions.

5.

Recoil Starter (pull rope) – Type of engine starting method.
Alternate type would be electric start (ignition key).

6.

Recoil Starter – Housing for pull rope and starter.

7.

Oil Filler Cap/Dipstick –  Remove this cap to add oil to the
oil tank. Use dipstick to check oil level.

8.

Oil Drain Plug – Unscrew plug to drain oil from engine
crankcase. Dispose of oil in a safe manner.

9.

Decompression Lever – Press down before starting
engine. To prevent damage to the engine, DO NOT use for
any other purpose.

10. Fuel Cock – Controls the flow of diesel fuel to the engine.

Must be in the ON position when starting and running the
engine.