Graco Inc. 309511 ユーザーズマニュアル
309511
Rev. D
Operating Instructions
INSTRUCTIONS
This manual contains important
warnings and information.
READ AND KEEP FOR REFERENCE.
warnings and information.
READ AND KEEP FOR REFERENCE.
Pressure Roller Attachment
Model 245907, Series C
D 9 in. (23 cm) roller frame with 45_ angle and 12 in. reach
D 1/2 in. (13 mm) nap roller cover
3600 psi (24.8 MPa, 248 bar) Maximum Fluid Inlet Pressure
*
The best operating pressure is the lowest pressure that provides
an even paint supply to the roller and typically does not exceed
300 psi (2.1 MPa, 21 bar).
an even paint supply to the roller and typically does not exceed
300 psi (2.1 MPa, 21 bar).
*
CAUTION
Never leave water in the pump, gun, or pressure roller.
Doing so could cause corrosion and damage from freezing.
For storage, flush the system with Graco Pump Armor
Doing so could cause corrosion and damage from freezing.
For storage, flush the system with Graco Pump Armor
t or
mineral spirits/paint thinner.
GRACO INC.
P.O. BOX 1441
MINNEAPOLIS, MN
55440–1441
ECOPYRIGHT 2002, GRACO INC.
Graco Inc. is registered to I.S. EN ISO 9001