Hitachi N 5008AC ユーザーズマニュアル

ページ / 44
— 4 —
English
SAFETY
IMPORTANT SAFETY INSTRUCTIONS
FOR USING STAPLERS
MMlMM
READ ALL INSTRUCTIONS
DANGER
1. ALWAYS WEAR EYE PROTECTOR.
When operating the Stapler, always wear eye protector with side
shields, and make sure others in work area wear eye protector, too.
Eye protector must conform to the requirements of American National
Standards Institute, ANSI Z87.1 and provide protection against flying
particles both from the front and side.
The employer must enforce the use of eye protector by the Stapler
operator and others in work area.
2. NEVER USE BOTTLED GASES.
Never use oxygen, combustible gases or any other bottled gases as a
power source for the Stapler.
Use of the above gases is dangerous, as the Stapler will explode.
Use only clean, dry, regulated compressed air.
WARNING
3. DO NOT EXCEED 120 psi.
Do not exceed maximum recommended air pressure 120 psi (8.3 bar
8.5 kgf/cm
2
).
Never connect the Stapler to pressure which potentially exceeds 200 psi
(13.7 bar
14 kgf/cm
2
) as the Stapler can burst.
4. NEVER POINT STAPLER TOWARD YOURSELF
OR ANYONE ELSE.
Always assume the Stapler contains fasteners.
Never point the Stapler toward yourself or anyone
else, whether it contains fasteners or not.
If fasteners are mistakenly driven, it can lead to severe
injuries.
Never engage in horseplay with the Stapler.
Respect the Stapler as a working implement.
5. NEVER CARRY WITH FINGER ON TRIGGER.
Remove finger from trigger when not driving
fasteners.
Never carry the Stapler with finger on trigger since
you could drive a fastener unintentionally and injure
yourself or someone else.
Always carry the Stapler by the handle only.
6. ALWAYS WEAR EAR AND HEAD PROTECTOR.
Always wear ear protector to protect your ears from
loud noise.
Always wear head protector to protect your head from
flying objects.
7. STORE STAPLER PROPERLY.
When not in use, the Stapler should be stored in a dry
place. Keep out of reach of children. Lock the storage
area.
8. KEEP WORK AREA CLEAN.
Cluttered areas invite injuries. Clear all work areas of
unnecessary tools, debris, furniture, etc.