Senco PalletPro 57F プリント

1¾

⁄

2¼

.092

}

.092

.082

Applications:

Features and Benefits:

Tool Specifications:

Fastener Specifications:

The PalletPro

™

57F Coil Nailer is built for high speed operation, this

coil nailer is designed to handle the toughest production applications.

Item #: 4L0001N Contact Actuation (Dual Action)

Weight: 5.9 lbs. ( 2.67 kg)

Height: 11.14" (283 mm)

Length: 11.97" (304 mm)

Nail Capacity: 300 - 350

Operating Pressure: 70-120 psig (4.8-8.3 bar)

Mode of Operation: Tool is available with either sequential

or contact actuation trigger mechanism.

Hose Fitting:

⁄

“ NPT

Drives full round head coil nails from 1" - 2¼" smooth and ring shank,

.082 - .092 diameter.

A lightweight and versatile tool for boxes and crates, carton-to-skid and

pallets.

• Collation – wire weld

• Aluminum mainbody – tool weighs only 5.9 lbs.

• Adjustable nail canister accommodates wide range of nails

• High capacity nylon magazine – fast and easy loading

• Body protection – side steel wearplates reduce abrasion of tool

• High durability driver and piston bumper for long life

PalletPro

™

57F

Coil Nailer

LLROUND

H EAD

For additional information on how SENCO will save you time, reduce

costs, and increase quality, call us at 1-800-543-4596 to find your

nearest Authorized Senco Dealer or Distributor or visit our web site at:

www.senco.com

Sequential Actuation Trigger (also known as restrictive trigger or trigger fire)

operates in the following sequence - depress the safety element at the nose of tool

against the work surface then pull the trigger. After each fastener is driven, release

the trigger and lift the tool off the work surface before starting the sequence again.

This trigger is recommended and acceptable for most applications.

Contact Actuation Trigger (also known as dual action, bounce or bottom fire)

operates in the following sequence- pull the trigger first and keep the trigger pulled

while moving the tool along the work surface with a bouncing motion, depressing

the safety element at the nose of the tool against the work surface where the fastener

is to be driven. This trigger is recommended for use by trained professionals only

in high production or volume applications.

Always read the Operators Manual and Safety Instructions with all tools to ensure

proper use and safety precautions or log on to www.senco.com or call

1-800-543-4596 for more information on SENCO’s trigger systems. Choose the

right trigger system for your specific needs!

LIM

ITE

D WARRA

YEAR

}