Hitachi NR 83AA4 ユーザーズマニュアル

English

(4) Check Push Lever before use. Make sure the

Push Lever operates properly. (The Push Lever may

be called “Safety”.) Never use the Nailer unless the

Push Lever is operating properly, otherwise the Nailer

could drive a fastener unexpectedly. Do not tamper

with or remove the Push Lever, otherwise the Push

Lever becomes inoperable.

(5) Keep all screws and covers tightly in place. Keep

all screws and covers tightly mounted.

Check their condition periodically. Never use the

Nailer if parts are missing or damaged.

(6) Do not load fasteners with Trigger or Push Lever

depressed. When loading fasteners into the Nailer

or when connecting the air hose,

1) do not depress the Trigger;

2) do not depress the Push Lever; and

3) keep the Nailer pointed downward.

(7) Keep hands and feet away from fi ring head

during use. Never place your hands or feet closer

than 8 inches (200 mm) from the fi ring head. A

serious injury can result if the fasteners are defl ected

by the workpiece, or are driven away from the point of

entry.

(8) Do not drive fasteners into thin boards or near

corners and edges of workpiece.

The fasteners can be driven through or away from the

workpiece and hit someone.

(9) Never drive fasteners from both sides of a wall

at the same time. The fasteners can be driven into

and through the wall and hit a person on the opposite

side.

(10) Check for live wires. Avoid the risk of severe

electrical shock by checking for live electrical wires

that may be hidden by walls, fl oors or ceilings. Turn

oﬀ the breaker switch to ensure there are no live

wires.

(11) Never carry Nailer by hose.

(12) Do not disconnect air hose from Nailer with

fi nger on Trigger. The Nailer can fi re when re-

connected to An air supply.

(13)

Handle Nailer correctly. Operate the Nailer

according to this Manual. Never allow the Nailer to

be operated by children, individuals unfamiliar with its

operation or unauthorized personnel.

(14) Never use Nailer for applications other than

those specifi ed in this manual.

(15) Never modify or alter a Nailer. Doing so may cause

it to malfunction and personal injuries may result.

(16) Do not remove Dust Cover. Fragments of wire

collating fasteners can fl y out.

EMPLOYER’S RESPONSIBILITIES

1. Ensure that this MANUAL is available to operators

and personnel performing maintenance.

2. Ensure that Nailers are used only when operators and

others in work area are wearing EYE PROTECTION.

3. Enforce the use of EYE PROTECTION by operators

and others in work area.

4.  Keep Nailers in safe working order.
5.  Maintain Nailers properly.
6.  Ensure that Nailers which require repair are not

further used before repair.

SAVE THIS MANUAL AND

KEEP IT AVAILABLE FOR OTHERS!

SAFETY

— Continued

WARNING

000Book_NR83AA4_US.indb 7

2013/04/23 15:04:13