Hitachi NT 65MA4 (S) ユーザーズマニュアル

16

15 

Disconnect air 

hose

Adjuster

If nails are driven too shallow, turn the adjuster 

to the deep side.
3

  Stop turning the adjuster when a suitable 

position is reached for a nailing test.

4

  Connect the air hose.

 

ALWAYS WEAR SAFETY GLASSES.

 

Perform a nailing test.

5

  DISCONNECT AIR HOSE FROM NAILER.

6

  Choose a suitable position for the adjuster.

Too Deep

Too Shallow

Turn Adjuster

Turn Adjuster

Flush

Flush

2

2

● Be sure to release your fi nger from 

● Do not point the air outlet at a 

● Do not use the blow nozzle with the 

This Nailer has a blow nozzle that blows out 

wood shavings which occur during work.

Press the knob with your thumb to use the blow 

nozzle, as shown in the fi gure.

Knob

Air outlet

● When the blow nozzle is used for a long time, 

the nailing force may degrade temporarily. 

In this case, allows the air supply pressure 

to stabilize before starting work.

● Oil in the body or drained water from the 

compressor can sometimes spout out 

of the air outlet. It is recommended that 

you once conduct a test before use and 

see if such phenomenon happens at an 

environment where spouted oil will cause 

any inconvenience.

● When changing the exhaust 

The direction of the exhaust vent can be 

changed by turning the top cover.

Exhaust 

Vent

Top Cover

000Book_NT65MA4(S)_US.indb   16

000Book_NT65MA4(S)_US.indb   16

2010/11/24   9:04:30

2010/11/24   9:04:30