Hitachi NT 65MA4 ユーザーズマニュアル

English

IMPORTANT INFORMATION

Read and understand tool labels and all of the operating instructions,

safety precautions and warnings in this manual before operating or

maintaining this nailer.

Failure to follow warnings could result in DEATH or SERIOUS INJURY.

Most accidents that result from the operation and maintenance of Nailers are caused by

the failure to observe basic safety rules or precautions. An accident can often be avoided

by recognizing a potentially hazardous situation before it occurs, and by observing

appropriate safety procedures.

Basic safety precautions are outlined in the “SAFETY” section of this Manual and in the

sections which contain the operation and maintenance instructions.

Hazards that must be avoided to prevent bodily injury or machine damage are identifi ed

by DANGERS and WARNINGS on the Nailer and in this Manual.

Never use this Nailer for applications other than those specifi ed in this Manual.

DEFINITIONS OF SIGNAL WORDS
DANGER indicates an imminently hazardous situation which, if not avoided, will result in death

or serious injury.

WARNING indicates a potentially hazardous situation which, if not avoided, could result in death

or serious injury.

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor

or moderate injury, or may cause machine damage.

NOTE emphasizes essential information.

EXPLANATION OF THE NAILING ACTION OF THE HITACHI NAILER

SINGLE ACTUATION MECHANISM (SINGLE SEQUENTIAL ACTUATION MECHANISM):

○

First, press the push lever against the wood; next, pull the trigger to drive the fastener.

First, pull the trigger; next, press the push lever against the wood to drive the fastener.

After fastening once, fastening will not be possible again until the trigger is released and

pressed again.

CONTACT ACTUATION MECHANISM:

○

First, press the push lever against the wood; next, pull the trigger to drive the fastener.

First, pull the trigger; next, press the push lever against the wood to drive the fastener.

If the trigger is held back, a fastener will be driven each time the push lever is pressed against

the wood.

FULL SEQUENTIAL ACTUATION MECHANISM:

○

First, press the push lever against the wood; next, pull the trigger to drive the fastener. Follow

the same sequence to continue driving fasteners.

000Book_NT65MA4_US.indb 3

2009/07/02 14:45:07