Makita UR140D ユーザーズマニュアル

epair

[3] DISASSEMBLY/ASSEMBLY

[3] -1. Gear shaft complete

(1) Remove Spool set and Safety cover as drawn in Fig. 2.

DISASSEMBLING

Spool set

Reverse side of

Safety cover

Compression

spring 17

1. While pressing the tabs, pull off Spool set.

Compression spring 17 is removed together

with Spool set.

2. Loosen two M4x20 Pan head screws, and remove Safety

cover from Motor housing set.

Tabs of

Spool set

M4x20 Pan

head screw

(2 pcs.)

M4x20 Pan

head screw

(2 pcs.)

Note: Each M4x20 Pan head screw has O ring 4 on the thread

to prevent losing. It is not necessary to separate M4x20

Pan head screws from Safety cover/ O rings 4.

Each O ring 4 on the

thread of M4x20

Pan head screw

Fig. 2

P 3/ 12

Apply Makita grease N. No.2 to the following portions designated with the black triangle to protect

parts and product from unusual abrasion.

[1] NECESSARY REPAIRING TOOLS

CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”.

Code No.

Description

Use for

1R022

Bearing plate

Supporting Spool holder to remove Spur gear 48

1R217

Ring 22

Supporting Spur gear 48 to remove Gear shaft

1R236

Round Bar for Arbor 7-100

Removing Spool holder

1R286

Round Bar for Arbor 12-50

Supporting Spool holder to press-fit Gear shaft

[2] LUBRICATION

Fig. 1

Item No.

Motor housing L

Gear room where Spur gear 48 rotates

3 g

Description

Amount

Portion to lubricate

DC motor

Spur gear 48

Motor housing R