Oregon HT255 ユーザーズマニュアル

16

OREGON® CORDLESS TOOL SYSTEM 

HEDGE TRIMMER MODEL HT255

AD 0213 - F/N 558936

Only use the cord set that was supplied 

with the charger  At first use, verify that 

the plug type matches the receptacle 

INDICATOR
The battery charger is equipped with an 

LED charge-state indicator that indicates 

the state of charging as well as conditions 

that may delay or prevent charging 

(Fig  8)  

Note: Until a battery pack is inserted, no 

lights will be visible 

Blinking orange light: a fault 

condition exists  There are 

several potential causes  See 

“Troubleshooting” in this manual 
Steady orange light: the battery 

pack temperature is beyond the 

acceptable range (0°C/32°F to 

40°C/104°F)  Allow the battery pack 

to reach the acceptable 

temperature range before 

charging  The pack may be left on 

the charger as the temperature 

adjusts  Charging will begin when 

the proper temperature is 

reached 

Blinking green light: battery pack 

is charging 
Steady green light: battery pack is 

READY FOR USE 

With the charger cord connected to the 

charger and plugged into an electrical 

outlet, align the grooves in the battery 

with the rails on the charger and slide the 

battery pack onto the charger until fully 

seated (Fig  9) 

Check the charge-state indicator for 

charging conditions