Zenoah eHT600D ユーザーズマニュアル

■ BLADE (F8)

• Check the blade and the fasteners

for looseness, cracking, or
bending.

• Check the cutting edges and

reform with a flat file.

Point:
1. Keep the end corner sharp.
2. Round the root of the edge.
3. Do not use water when using a

grinder.

■ You need not to adjust the gap

When mounting the blade, make sure
to fasten the spacer, washer and
bolt.

■ SAFETY LOCK (F10) 

Safety lock is the device not to
accelerate the throttle lever without
intention. While pushing the safety
lock, you can accelerate the throttle
lever.

1. Check if the throttle lever does not

move when you do not push the
safety lock.

2. Check if the throttle lever moves

when you grasp or release it while
pushing the safety lock.