Zenoah CHTZ2401L ユーザーズマニュアル

1. Grip the handles firmly with both hands using your

whole hand. Place your feet slightly apart (slightly
further apart than the width of your shoulders) so
that your weight is distributed evenly across both
legs, and always be sure to maintain a steady, even
posture while working.

2. Maintain the speed of the engine at the level

required to perform cutting work, and never raise the
speed of the engine above the level necessary.

3. If the unit starts to shake or vibrate, turn off the

engine and check the whole unit. Do not use it until
the trouble has been properly corrected.

4. Keep all parts of your body away from moving

cutting attachment and hot surfaces.

5. Never touch the muffler, spark plug, or other metallic

parts of the engine while the engine is in operation
or immediately after shutting down the engine. Doing
so could result in serious burns or electrical shock. 

6. While operating the machine be always sure of a

safe and secure operating position especially when
using steps or a ladder.

• IF SOMEONE COMES
1. Guard against hazardous situations at all times.

Warn adults to keep pets and children away from the
area. Be careful if you are approached. Injury may
result from flying debris.

2. If someone calls out or otherwise interrupts you

while working, always be sure to turn off the engine
before turning around.

■ MAINTENANCE
1. In order to maintain your product in proper working

order, perform the maintenance and checking
operations described in the manual at regular
intervals.

2. Always be sure to turn off the engine before

performing any maintenance, checking procedures
or working on the machine.

The metallic parts reach high temperatures
immediately after stopping the engine.
3. When replacing the cutting attachment or any other

part, or when replacing the oil or any lubricant,