Zenoah EXZ2401S ユーザーズマニュアル

■ ATTACHING THE PRUNING MECHANISM (SE1)
1. Remove the cap on the end of the main pipe.
2. Remove the screw screwed into the end of the gear

case.

3. Insert the end of the gear case into the main pipe.
4. Line up the hole on the end of the gear case into

which the screw is to be inserted with the hole on the
main pipe, and screw the screw firmly in.

5. Using a wrench, screw in the bolt provided to fix the

mechanism into place. 

A standard package contains the items as shown
below. (SE2) 

Install the guide bar and the saw chain on the gear
case as follows. 

1. Loosen a nut and remove the chain cover. 
2. Mount the guide bar then fit the saw chain around

the bar and sprocket. (SE3)

3. Fit the chain tensioner nut into the lower hole of the

guide bar, then install the chain cover, and fasten
the mounting nut to finger tightness. (SE3)(SE4)