Shindaiwa X7502864301 ユーザーズマニュアル

ページ / 28
3
 WARNING!
 
 Minimize the Risk of Fire!
ALWAYS check unit for fuel leaks 
before use. Check for leaks around 
fuel tank cap while refueling. If fuel 
leaks are found immediately stop 
using the unit. Fuel leaks must be 
repaired before using unit.
ALWAYS move the unit to a place 
well away from a fuel storage area 
or other readily flammable materials 
before starting the engine.
DH251003 
Work Safely
Shindaiwa hedge trimmers operate at 
very high speeds and can do serious 
damage or injury if they are misused 
or abused. Never allow a person without 
training or instruction to operate your unit!
Stay Alert
You must be physically and mentally fit to 
operate this unit safely. 
 WARNING!
Never operate power  
equipment of any kind if you are tired 
or if you are under the influence of al-
cohol, drugs, medication or any other 
substance that could affect your abil-
ity or judgement.
DO NOT OPERATE THIS UNIT
IF YOU ARE TIRED, ILL OR
UNDER THE INFLUENCE OF
ALCOHOL, DRUGS, OR
MEDICATION.
 WARNING!
Never make unauthorized attach-
ment installations. 
Avoid using or storing this 
unit in a wet environment.  
Water on the cutters may  
enter the gearcase and  
damage your unit. 
Always wear eye, ear, 
and hand protection while 
operating this unit!
Always wear close-fitting clothing. Gloves offer 
added protection and are strongly recommended. 
Do not wear clothing or jewelry that could get 
caught in machinery.
Always keep proper footing and do not 
overreach. Maintain your balance at all 
times during operation.
Use extreme caution when  
operating near fences or  
electric wiring.
Never cut metal objects or 
wire with the blade.
Never operate this unit if 
the safety guard has been 
removed or damaged!
Never allow children to use 
the unit. Avoid operating near 
bystanders.
Always stop the engine 
and install the blade cover 
before moving to another 
work site, and maintain a 
firm footing while operating 
or carrying the trimmer.
Always stop the  
engine
 before 
removing branches 
or debris from the 
cutters! Never allow 
the cutters to contact 
buildings or other  
hard objects!
Avoid cutting large or extremely 
“woody” branches. Doing so can 
shorten cutter life, and may also 
damage the gearcase.
WORK SAFELY!
Figure 1
Always operate with 
both hands firmly 
gripping the unit.
General Safety Instructions