Zenoah BT250 ユーザーズマニュアル
6
3. Warning labels on the machine
English
For safe operation and maintenance, symbols are
carved in relief on the machine. According to these
indications, please be careful not to take a mistake.
carved in relief on the machine. According to these
indications, please be careful not to take a mistake.
(a) The port to refuel the "MIX GASOLINE"
Position:
FUEL TANK CAP
Position:
FUEL TANK CAP
(b) The direction to close the choke
Position:
AIR CLEANER COVER
Position:
AIR CLEANER COVER
(c) The direction to open the choke
Position:
AIR CLEANER COVER
Position:
AIR CLEANER COVER
(1) Read owner's manual before operating this
machine.
(2) Wear head, eye and ear protection.
(3) Warning! Danger of kickback.
(4) Beware of thrown objects.
(5) Warning/Attention
(6) Keep all children, bystanders and helpers 15
(3) Warning! Danger of kickback.
(4) Beware of thrown objects.
(5) Warning/Attention
(6) Keep all children, bystanders and helpers 15
meters away from the brushcutter
If warning label peel off or become soiled and
impossible to read, you should contact the dealer from
which you purchased the product to order new labels
and affix them in the required location(s).
impossible to read, you should contact the dealer from
which you purchased the product to order new labels
and affix them in the required location(s).
Never modify your brushcutter.
We won't warrant the machine, if you use the
remodeled brushcutter or you don't observe the
proper usage written in the manual.
We won't warrant the machine, if you use the
remodeled brushcutter or you don't observe the
proper usage written in the manual.
WARNING
IMPORTANT
4. Symbols on the machine
(1)
(2)
(3)
(4)
15m (50ft)
(5)
(6)
IMPORTANT ENGINE INFORMATION
THIS ENGINE CONFORMS TO 2008
*1
U.S. EPA REGULATIONS FOR SMALL
NONROAD ENGINES. COMPLIANCE PERIOD : CATEGORY B
REFER TO OWNER'S MANUAL FOR MAINTENANCE, SPECIFICATIONS
AND ADJUSTMENTS. USE JASO FD OR ISO L-EGD GRADE 50:1 OIL.
REFER TO OWNER'S MANUAL FOR MAINTENANCE, SPECIFICATIONS
AND ADJUSTMENTS. USE JASO FD OR ISO L-EGD GRADE 50:1 OIL.
ENGINE FAMILY : 8HCPS. 0254AD ; EM
*2
DISPL. : 25cc
MANUFACTURED :
■ EMISSION CONTROL
An emission control label is located on the engine.
An emission control label is located on the engine.
*1: The year will be changed every year of manufacturing.
*2: The initial number will be changed every year of
*2: The initial number will be changed every year of
manufacturing.