Husqvarna 325RJ ユーザーズマニュアル

14 – 

English

•

Hook the blade guard/combination guard (A) onto the 
fitting on the shaft and secure with the bolt. CAUTION! 
Use the recommended blade guard. See the Technical 
data section.

•

Fit the drive disc (B) on the output shaft.

•

Turn the blade shaft until one of the holes in the drive disc 
aligns with the corresponding hole in the gear housing.

•

Insert the locking pin (C) in the hole to lock the shaft.

•

Place the blade (D), support cup (E) and support flange 
(F) on the output shaft.

•

Fit the nut (G). The nut must be tightened to a torque of 
35-50 Nm (3.5-5 kpm). Use the socket spanner in the tool 
kit. Hold the shaft of the spanner as close to the blade 
guard as possible. 

To tighten the nut, turn the spanner in the opposite 
direction to the direction of rotation (left-hand thread).

•

Fit the correct trimmer guard (A) for use with the trimmer 
head. 

Hook the trimmer guard/combination guard onto the fitting 
on the shaft and secure with the bolt (L).

•

Fit the drive disc (B) on the output shaft.

•

Turn the blade shaft until one of the holes in the drive disc 
aligns with the corresponding hole in the gear housing.

•

Insert the locking pin (C) in the hole to lock the shaft.

•

Screw on the trimmer head/plastic blades (H) in the 
opposite direction to the direction of rotation.

•

To dismantle, follow the instructions in the reverse order.