Husqvarna 325RJ ユーザーズマニュアル
English
– 9
SAFETY INSTRUCTIONS
Starting
•
The complete clutch cover and shaft must be fitted before
the machine is started, otherwise the clutch can come
loose and cause personal injury.
the machine is started, otherwise the clutch can come
loose and cause personal injury.
•
Never start the machine indoors. Exhaust fumes can be
dangerous if inhaled.
dangerous if inhaled.
•
Observe your surroundings and make sure that there is no
risk of people or animals coming into contact with the
cutting equipment.
risk of people or animals coming into contact with the
cutting equipment.
•
Place the machine on the ground, ensure the cutting
attachment is clear of twigs and stones. Hold the body of
the machine on the ground using your left hand
(CAUTION! Not with your foot). Then grip the starter
handle with your right hand and pull the starter cord.
attachment is clear of twigs and stones. Hold the body of
the machine on the ground using your left hand
(CAUTION! Not with your foot). Then grip the starter
handle with your right hand and pull the starter cord.
Fuel safety
•
Always use a fuel container with an anti-spill valve.
•
Never refuel the machine while the engine is running.
Always stop the engine and let it cool for a few minutes
before refuelling.
Always stop the engine and let it cool for a few minutes
before refuelling.
•
Make sure there is plenty of ventilation when refuelling or
mixing fuel (gasoline and 2-stroke oil).
mixing fuel (gasoline and 2-stroke oil).
•
Move the machine at least 3 m from the refuelling point
before starting it.
before starting it.
•
Never start the machine:
1
If you have spilt fuel on it. Wipe off the spillage and
allow remaining fuel to evaporate.
allow remaining fuel to evaporate.
2
If you have spilt fuel on yourself or your clothes,
change your clothes. Wash any part of your body that
has come in contact with fuel. Use soap and water.
change your clothes. Wash any part of your body that
has come in contact with fuel. Use soap and water.
3
If the machine is leaking fuel. Check regularly for leaks
from the fuel cap and fuel lines.
from the fuel cap and fuel lines.
4
Avoid all skin contact with fuel. Fuel is a skin irritant
and may even cause skin changes.
and may even cause skin changes.
Transport and storage
•
Store and transport the machine and fuel so that there is
no risk of any leakage or fumes coming into contact with
sparks or naked flames, for example, from electrical
machinery, electric motors, electrical relays/switches or
boilers.
no risk of any leakage or fumes coming into contact with
sparks or naked flames, for example, from electrical
machinery, electric motors, electrical relays/switches or
boilers.
•
When storing and transporting fuel always use approved
containers intended for this purpose.
containers intended for this purpose.
•
When storing the machine for long periods the fuel tank
must be emptied. Contact your local gas station to find out
where to dispose of excess fuel.
must be emptied. Contact your local gas station to find out
where to dispose of excess fuel.
•
The transport guard must always be fitted to the cutting
attachment when the machine is being transported or in
storage.
attachment when the machine is being transported or in
storage.
!
WARNING! When the engine is started with
the choke in either the choke or start throttle
positions the cutting attachment will start to
rotate immediately.
the choke in either the choke or start throttle
positions the cutting attachment will start to
rotate immediately.
!
WARNING! Take care when handling fuel.
Bear in mind the risk of fire, explosion and
inhaling fumes.
Bear in mind the risk of fire, explosion and
inhaling fumes.